Your saved patterns are kept in this browser, on this computer. Nothing is sent anywhere. Clearing the browser's data removes them. “Share” gives you a link that brings a pattern back or passes it on (a file, for one made from your own picture).
Nothing matches that. Try another word.
Save this pattern
Share this pattern
Whoever opens your link sees this pattern and can choose to use it.
Short: easy to send. This site keeps the pattern for it. Long: the pattern is in the link itself. Nothing is kept.
What is in a link?
Which C.A.M.O. pattern it is, your colours, the size and the layout, and the name only if you tick it. Never anything about your model, your printer or you.
For a short link, this site keeps exactly that and the day it was made, with no note of who made it. It works until the site's owner takes it down.
Anyone who has a link can open it.
It was made from your own picture, which is too big for a link. Save it as a file and send the file yourself.
They open it with “Load one from a file” under “Saved”.
What is in the file?
The picture, your colours, the size, the layout and the name you gave it. The picture's own file name is left out, and so are the hidden notes a phone or camera puts in a picture (where and when it was taken, and with what). The picture itself is not changed.
This page sends nothing anywhere. Whoever gets the file gets the picture.
A pattern was shared with you
Someone sent you this pattern. Your model and your settings stay as they are.
This is one of the rude patterns, which you chose to hide, so its picture is not shown here.
Whoever sent it is not told what you do.
How it works
Watch it done from start to finish: about two minutes, with no sound. Save a copy.
Add your model. Drop an STL file on the page. It appears in the big view; drag to turn it.
Pick a pattern. Browse the patterns, or use a picture of your own. Change the size and colours until the flat sample looks right. “Save this pattern” keeps it for next time, and “Share” under “Saved” passes it on as a link.
Paint. C.A.M.O. colours the model. This takes from a few seconds to a few minutes for a big model.
Open it in your slicer. The file opens with every part of the model already assigned to a filament. Load the filaments in the order shown, then slice and print as usual.
Everything happens on this computer. Your models and pictures are not sent anywhere.
Saving and sharing your patterns
Once a pattern looks right, you can keep it and send it to other people.
SaveUnder the colours, press “Save this pattern” and give it a name. It keeps the pattern (or your own picture), your colours, the size and the layout.
Use againPress “Browse all”, then “Saved”, and press the one you want. Your model, your printer and your other settings stay as they are.
Rename or deleteEach saved pattern has “Rename” and “Delete” under it. Delete asks twice, because a deleted pattern cannot be brought back.
Share“Share” under a saved pattern gives you a link to send. Whoever opens it sees your pattern and chooses whether to use it. A short link is six letters, or is named after your pattern if you tick “Send its name too”; for a short link to work, this site keeps the pattern. A long link holds the pattern itself and is kept nowhere. Nothing about your model, your printer or you is in a link.
Your own pictureA pattern made from a picture of your own is too big for a link. “Share” saves it as a file instead, and you send the file yourself. The other person presses “Load one from a file” under “Saved”.
Where they areSaved patterns are kept in this browser, on this computer. Another browser or another computer does not have them, and clearing the browser's data removes them. A link you have kept brings one back.
Mixing filament types (PLA with PETG, and so on)
Each colour is its own filament, and the colours have to stick to each other. Colours of one type always do. Two different types often do not.
SticksPLA in any colour.
Peels apartPETG. The two are used as peel-off supports for each other.
Do not mixABS, ASA, PC and nylon, with or without fibre. They print much hotter and PLA can clog the nozzle. Bambu Studio stops this mix.
Not testedTPU, and anything not named here. Print something small first.
SticksPETG in any colour.
Peels apartPLA. The two are used as peel-off supports for each other.
Do not mixABS, ASA, PC and nylon, with or without fibre. They print much hotter and PETG can clog the nozzle. Bambu Studio stops this mix.
Not testedTPU, and anything not named here. Print something small first.
SticksThe same TPU in any colour.
Do not mixABS, ASA, PC and nylon, with or without fibre. They print much hotter and TPU can clog the nozzle. Bambu Studio stops this mix.
Not testedPLA and PETG. UltiMaker calls TPU with either one experimental. Print something small first.
SticksThe same type in any colour.
Do not mixPLA, PETG and TPU. They can clog the nozzle in the heat ABS and ASA need. Bambu Studio stops this mix.
Does not bondPC with ABS, by UltiMaker's table.
Not testedABS with ASA, nylon, and anything not named here. Print something small first.
SticksPC in any colour.
Do not mixPLA, PETG and TPU. They can clog the nozzle in the heat PC needs. Bambu Studio stops this mix.
Does not bondABS and nylon, by UltiMaker's table.
Not testedASA, and anything not named here. Print something small first.
SticksThe same nylon. These come in few colours.
Do not mixPLA, PETG and TPU. They can clog the nozzle in the heat nylon needs. Bambu Studio stops this mix.
Does not bondPC, by UltiMaker's table.
Not testedABS, ASA, and anything not named here. Print something small first.
Where this comes from: what is too hot to mix is Bambu Studio's own rule (version 2.9.1; a setting there turns it off). PLA and PETG as supports for each other is from Prusa. “Does not bond” is from UltiMaker's table for its own filaments. Nobody has measured any of it for C.A.M.O., and brands differ.
Report a problem
If something went wrong or looks wrong, save a report and send that file to whoever gave you C.A.M.O.
The report is a small text file. It holds your settings, what C.A.M.O. wrote while it worked, and a few numbers about your model: how big it is and how many triangles it has.
Your model is not in it. No shape, no picture of it, no file names. You never need to send your model, or a file C.A.M.O. made from it.
About
C.A.M.O.
C.A.M.O. Applies Multicolor Overlays
Beta version
This is a beta, so expect rough edges. What you make with it, and what you do with it, is your responsibility.
This site keeps a count of how it is used: visits and the country they come from, models loaded, paints made and which pattern, printer and number of colours they used, files saved, when the video or the tip box is opened, and when “Spread the word” is opened and which of its buttons are pressed. Only totals are kept. To count each browser once, the date of your last visit is kept in this browser. Your model, its name and your own pictures are never sent anywhere.
When you share a saved pattern with a short link, this site keeps that pattern so the link can find it: which pattern it is, the colours, the size, the layout, the day it was made, and the name if you ticked it. It keeps nothing about who made the link or who opens it, and the link works until the site's owner takes it down. A long link is kept nowhere.
Most filament colours are measurements of printed samples from filamentcolors.xyz, used under the Creative Commons Attribution 4.0 licence: only plain colours of PLA are taken, the names are tidied and the colours are as measured. Bambu Lab's are its own figures. Elegoo's are from the Open Filament Database (MIT licence) where no measurement exists.
Some of the links to filament shops earn C.A.M.O. a small commission when you buy. It costs you nothing extra.
The “Spread the word” buttons are made with shareon by Nikita Karamov (MIT licence).
If C.A.M.O. is useful to you, you can leave a tip. It goes to the people who make it.
For anywhere else, like Instagram or Discord, copy the link.
A post holds the address of C.A.M.O. and a few words about it, never anything about your model, your patterns or you. These sites hear nothing from this page until you press their button.
Welcome to C.A.M.O.
Brought to you by SquirtedGlizzys in collaboration with RG3D and Claude.
This is a beta, so expect rough edges. What you make with it, and what you do with it, is your responsibility.